July 2019
4-63
Xerox® B205/B215 Multifunction Printer Service Manual
REP 8.1
Repairs / Adjustments
Initial Release
REP 8.1 Control Panel (B205)
Parts List on PL 8.1
Removal
1. Switch off the printer, then disconnect the power cord.
2. Remove the Right Side Cover, RE
P 2.2.
3. Remove the Automatic Document Feeder (ADF), REP 1.5.
4. Remove the Scanner Module, REP 7.2.
5. Remove four screws under the Control Panel, Figure 1.
Figure 1 Control Panel screw removal
6. Release the Control Panel Assembly by lifting up the front of the panel while pulling it for-
ward, F
igure 2.
Figure 2 Control Panel release
7. Disconnect three Control Panel PWB connectors, then remove the Control Panel, F
igure
3.
Figure 3 Control Panel removal
Replacement
The replacement is the reverse of the removal procedure.
To Next Page
Loading...
