Xerox WorkCentre 3345 Service Manual

Troubleshooting
Xerox Internal Use Only Phaser 3330 and WorkCentre 3335/3345
Service Manual
2-3
Initial Actions
Some problems are easy to resolve. Use the steps below in an attempt to quickly isolate the problem.
1. Turn Off the printer, wait 10 seconds, then turn On the printer. This often solves problems related
to power transients, ESD, and software errors.
2. If a message appears on the Control Panel, see “Phaser 3330 Service Mode” on page 2-6 or
“WorkCentre 3335/3345 Service Mode” on page 2-10 or specific procedures related to error
messages.
3. Check the power cord. Is the power cord plugged into the printer and a properly grounded
electrical outlet? Is the power cord damaged?
4. Check the electrical outlet is capable of supplying the full power required by the printer. Refer to
Electrical for additional information. Is the outlet turned off by a switch or breaker?
5. Does other electrical equipment plugged into the outlet operate?

Xerox WorkCentre 3345 Specifications

General

Print Technology	Laser
Print Speed	Up to 42 ppm
Print Resolution	Up to 600 x 600 dpi
Automatic Document Feeder	50 sheets
Duplex Printing	Yes
Monthly Duty Cycle	Up to 80, 000 pages
First Page Out Time (Black)	As fast as 6.5 seconds
Processor	600 MHz
Paper Input (Standard)	250 sheets
Paper Output	150 sheets
Scan Resolution (Optical)	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Copy Resolution	Up to 600 x 600 dpi
Connectivity	USB, Ethernet, Wi-Fi
Functions	Copy, Print, Scan, Fax, Email
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plugin for Android, Mopria
Media Sizes Supported	Letter, Legal, A4, A5, B5, A6
Fax Transmission Speed	3 seconds per page
Maximum Paper Size	216 x 356 mm
Copy Speed (Black)	Up to 42 cpm