Xerox WorkCentre 3345 Service Manual

Image Quality
Xerox Internal Use Only Phaser 3330 and WorkCentre 3335/3345
Service Manual
3-21
Unfused Image
The image is not completely fused to the paper. The image easily rubs off.
Initial Actions
•Check the media path.
• Check the media. Is it supported and in good condition.
• Check the paper type settings for the source tray and print driver.
• Check the Fuser connection (P/J171).
Troubleshooting Reference Table
Troubleshooting Procedure Table
Applicable Parts Example Print
• Fuser (PL 3.3.36, Parts List 3.3 Fuser)
• Main PWB (PL 1.0.7, Parts List 1.0 Phaser 3330
Main) or Main PWB (PL 6.1.7, Parts List 6.1
WorkCentre 3335/3345 Main)
Step Actions and Questions Yes No
1. Check the media being used and its
condition.
Is the media dry and recommended?
Go to step 3. Replace with dry,
approved media, then
go to step 2.
2. Does the image print correctly? Complete. Go to step 3.
3. Check the Toner type.
Is non-Xerox Toner in use?
Replace with Xerox
toner, then go to step 4.
Go to step 5.
4. Does the error persist? Go to step 5. Complete.
5. Replace the Fuser (PL 3.3.36, Parts List 3.3
Fuser).
Does the error persist?
Go to step 6. Complete.

Xerox WorkCentre 3345 Specifications

General

Print Technology	Laser
Print Speed	Up to 42 ppm
Print Resolution	Up to 600 x 600 dpi
Automatic Document Feeder	50 sheets
Duplex Printing	Yes
Monthly Duty Cycle	Up to 80, 000 pages
First Page Out Time (Black)	As fast as 6.5 seconds
Processor	600 MHz
Paper Input (Standard)	250 sheets
Paper Output	150 sheets
Scan Resolution (Optical)	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Copy Resolution	Up to 600 x 600 dpi
Connectivity	USB, Ethernet, Wi-Fi
Functions	Copy, Print, Scan, Fax, Email
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plugin for Android, Mopria
Media Sizes Supported	Letter, Legal, A4, A5, B5, A6
Fax Transmission Speed	3 seconds per page
Maximum Paper Size	216 x 356 mm
Copy Speed (Black)	Up to 42 cpm