EasyManuals Logo

Xerox WorkCentre 3345 Service Manual

Xerox WorkCentre 3345
434 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #198 background imageLoading...
Page #198 background image
Service Parts Disassembly
Xerox Internal Use Only Phaser 3330 and WorkCentre 3335/3345
Service Manual
4-13
Covers and Doors
Front Door
WARNING: Do not perform repair activities with the power on or electrical power supplied to the
machine. The machine could activate and cause serious personal injury when the power is on or
electrical power is supplied.
Parts List 1.0 Phaser 3330 Main
1. Do the preparations (page 4-3).
2. If this printer is on the Optional Tray 2 Base, remove it from the base and disconnect the
Connector CN35 (page 4-8).
3. Remove Tray 1 (page 4-6).
4. Remove the Toner Cartridge and Photoreceptor Drum Cartridge (page 4-5).
CAUTION: If the Front Door is removed, do not attempt to remove the Drum Cartridge without
pulling the black coupling bar (that holds the left side of the Front Door) forward so that it retracts
the pin that holds the Drum Cartridge in place. Attempting to remove the Drum Cartridge without
releasing this pin could result in toner spillage and possible damage to the machine.
5. Disconnect the arm on the left hand side of the printer, release left hook and then the right hook
to remove the Front Door (Parts List 1.0 Phaser 3330 Main, PL 1.3.1).
CAUTION: Do not damage the wires when removing the cover.
6. Loosen or remove the Right Cover (page 4-17)as necessary, to gain access to and then disconnect
the Connector located behind the Right Cover.
Note: Press inward on one side of the cover to release it, then repeat that action to release the
other side
Note: If the Front Door is replaced, the Tag Matrix Label must be peeled off and placed on the
new Front Door.
Rear Door
Parts List 1.0 Phaser 3330 Main
WARNING: Do not perform repair activities with the power on or electrical power supplied to the
machine. The machine could activate and cause serious personal injury when the power is on or
electrical power is supplied.
1. Do steps 1-4 in Preparations (page 4-3)
2. Remove the Duplex Assembly (page 4-7).
3. Open the Rear Door (Parts List 1.0 Phaser 3330 Main, PL 1.0.11).

Table of Contents

Other manuals for Xerox WorkCentre 3345

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 3345 and is the answer not in the manual?

Xerox WorkCentre 3345 Specifications

General IconGeneral
Print TechnologyLaser
Print SpeedUp to 42 ppm
Print ResolutionUp to 600 x 600 dpi
Automatic Document Feeder50 sheets
Duplex PrintingYes
Monthly Duty CycleUp to 80, 000 pages
First Page Out Time (Black)As fast as 6.5 seconds
Processor600 MHz
Paper Input (Standard)250 sheets
Paper Output150 sheets
Scan Resolution (Optical)Up to 600 x 600 dpi
Fax Speed33.6 Kbps
Copy ResolutionUp to 600 x 600 dpi
ConnectivityUSB, Ethernet, Wi-Fi
FunctionsCopy, Print, Scan, Fax, Email
Mobile PrintingApple AirPrint, Google Cloud Print, Xerox Print Service Plugin for Android, Mopria
Media Sizes SupportedLetter, Legal, A4, A5, B5, A6
Fax Transmission Speed3 seconds per page
Maximum Paper Size216 x 356 mm
Copy Speed (Black)Up to 42 cpm

Related product manuals