Xerox WorkCentre 3615 System Administrator Guide

Initial Setup
Configuring Audio Tones
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
3. Touch System Settings, then touch General.
4. Touch Audio.
5. Select the tone to change, then select an option.
6. Touch OK.
7. Repeat for each tone that you want to set.
8. To return to the General menu, touch the Back arrow.
Configuring the RAM Disk
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
3. Touch System Settings, then touch General.
4. Touch RAM Disk, then touch On.
Note: The RAM Disk feature is not available when the Device Memory option is installed.
5. To specify the amount of memory to allocate to the RAM Disk file system, touch Plus (+) or Minus
(-).
6. Touch OK.
Setting the Startup Page
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
3. Touch System Settings, then touch General.
4. Touch Startup Page.
5. To print a Startup Page when the printer is turned on, touch On.
6. Touch OK.
Configuring the Low Toner Alert Message
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
3. Touch System Settings, then touch General.
4. Touch Low Toner Alert Message.
5. To display an alert message when the toner is low, touch On.
6. Touch OK.
Xerox
®
WorkCentre
®
3615 Black and White Multifunction Printer 21
System Administrator Guide

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux