Xerox WorkCentre 3615 System Administrator Guide

Network Connectivity
SNTP
Simple Network Time Protocol (SNTP) synchronizes the internal clocks of computers over a network
connection.
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
Note: If you do not know the IP address of your printer, see Finding the IP Address of Your Printer on
page 12.
2. Click Properties > Protocols > SNTP.
3. Select Enable SNTP.
4. For IP Address/Host Name, type the appropriately formatted IP address or host name for the time
server.
5. For Connection Timeout, type the time in seconds that the printer waits before disconnecting from
the time server.
6. For Time Synchronization Interval, type the synchronization interval in hours.
Notes:
• Last Connection Time indicates when the printer last synchronized the time.
• Connection Status indicates if the printer is connected to the time server.
7. Click Save Changes.
60 Xerox
®
WorkCentre
®
3615 Black and White Multifunction Printer
System Administrator Guide

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux