Initial Setup
Configuring Tray Settings
Use this menu to configure the paper trays for the paper size and type, set custom sizes, and turn the
display prompts on and off.
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Tray Management > Tray Settings.
3. To configure the bypass tray settings:
a. Touch Bypass Tray.
b. To have the printer prompt you to set the paper type and size when paper is loaded, select
Display Tray Prompt.
c. To use the paper size and type from the print driver, select Use Driver Settings for Print Job.
d. To dedicate the bypass tray for a paper size and type, clear Display Tray Prompt and Use
Driver Settings for Print Job.
• To select a paper or envelope size, touch Size, touch the Up or Down arrows to navigate,
then touch a size.
• To select a paper type, touch Type, touch the Up or Down arrows to navigate, then touch
a paper type.
e. Touch OK.
4. To configure a paper tray:
a. Touch Tray 1–4.
b. To have the printer prompt you to set the paper type and size when paper is loaded, select
Display Tray Prompt.
• To select a paper or envelope size, touch Size, touch the Up or Down arrows to navigate,
then touch a size.
• To select a paper type, touch Type, touch the Up or Down arrows to navigate, then touch
a paper type.
c. Touch OK.
5. Touch the Back arrow to return to the previous menu, or press the Services Home button to return
to Service Home.
24 Xerox
®
WorkCentre
®
3615 Black and White Multifunction Printer
System Administrator Guide
To Next Page
Loading...
Need help?
General
