Network Connectivity
SNMP
Simple Network Management Protocol (SNMP) is a set of network protocols designed to allow you to
manage and monitor devices on your network.
Enabling SNMP
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
Note: If you do not know the IP address of your printer, see Finding the IP Address of Your Printer on
page 12.
2. Click Properties > Protocols > SNMP.
3. Select Enable SNMP.
4. Select Enable SNMPv1/v2c Protocols or Enable SNMPv3 Protocol.
5. To edit the SNMP properties, click Edit SNMPv1/v2c Properties or Edit SNMPv3 Properties.
6. Click Save Changes.
Xerox
®
WorkCentre
®
3615 Black and White Multifunction Printer 49
System Administrator Guide
To Next Page
Loading...
