Xerox WorkCentre 3615

Network Connectivity
Port 9100
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
Note: If you do not know the IP address of your printer, see Finding the IP Address of Your Printer on
page 12.
2. Click Properties > Protocols > Port 9100.
3. Select Enable Port 9100.
4. For Port Number, type a port number or TCP/IP socket number.
5. For Connection Timeout, type the amount of time to wait before the connection times out.
6. To specify the hosts that can access the printer, click Host Access List.
7. Click Save Changes.
8. For the new settings to take effect, restart your printer.
42 Xerox
®
WorkCentre
®
3615 Black and White Multifunction Printer
System Administrator Guide