Network Connectivity
FTP Client
You can configure the FTP Client settings to specify the connection timeout and to select FTP Passive
instead of FTP Active mode.
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
Note: If you do not know the IP address of your printer, see Finding the IP Address of Your Printer on
page 12.
2. Click Properties > Protocols > FTP Client.
3. For Connection Timeout, type the amount of time to wait before the connection times out.
4. Select FTP Passive as needed. FTP Passive mode transfers data over a random port specified by the
FTP server from a connection made from the printer.
5. Click Save Changes.
Xerox
®
WorkCentre
®
3615 Black and White Multifunction Printer 55
System Administrator Guide
To Next Page
Loading...
