Xerox WorkCentre 3615

Initial Setup
Setting the Date and Time
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
3. Touch System Settings, then touch General.
4. Touch Date and Time.
5. To select your time zone:
a. Touch Time Zone.
b. Use the Up or Down arrows to navigate, select your geographic region and time zone, then
touch OK.
6. To set the date:
a. Touch Date.
b. Touch Format, then touch the date format that you want to use.
c. To enter the month, touch Month, then use the keypad.
d. To enter the date, touch Day, then use the keypad.
e. To enter the year, touch Year, then use the keypad.
f. Touch OK.
7. To set the time:
a. Touch Time.
b. To select the format, touch 12 Hour or 24 Hour.
c. To enter the hour, touch Hour, then use the keypad.
d. To enter the minutes, touch Minute, then use the keypad.
8. Touch OK.
9. To return to the General menu, touch the Back arrow.
Setting the Measurement Units
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
3. Touch System Settings, then touch General.
4. Touch Measurement.
5. To select an option for units, touch millimeter (mm) or inches (").
6. Touch OK.
Setting the Display Brightness
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
3. Touch System Settings, then touch General.
4. Touch Display Brightness.
5. Touch - or + on the display or use the keypad to enter a number from 1 through 10.
6. Touch OK.
20 Xerox
®
WorkCentre
®
3615 Black and White Multifunction Printer
System Administrator Guide