Xerox WorkCentre 3615 System Administrator Guide

Copying
Configuring Copy Settings in CentreWare Internet Services
The printer uses the default copy settings on all copy jobs unless you change them for an individual job.
You can modify the default copy settings.
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
Note: If you do not know the IP address of your printer, see Finding the IP Address of Your Printer on
page 12.
2. Select Properties > Copy > Copy Settings.
3. To specify the 2-sided copy options, for 2 Sided Copying, select an option.
4. To rotate the image on side 2 by 180 degrees, for Rotate Side 2, select On.
5. To copy a single page multiple times onto one or both sides of the paper, for Pages per Side, select
an option. The printer reduces the pages proportionally to fit the paper.
6. To erase unwanted images from the top and bottom of the page, for Edge Erase Top/Bottom, type
a value.
7. To erase unwanted images from the left and right of the page, for Edge Erase Left/Right, type a
value.
8. To erase unwanted images from the middle of the page, for Edge Erase Middle, type a value.
9. Click Save Changes.
84 Xerox
®
WorkCentre
®
3615 Black and White Multifunction Printer
System Administrator Guide

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux