Xerox WorkCentre 3615 System Administrator Guide

Network Connectivity
Configuring SMB
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
Note: If you do not know the IP address of your printer, see Finding the IP Address of Your Printer on
page 12.
2. Click Properties > Protocols > SMB.
3. Select Enable SMB.
4. Select TCP/IP and NetBEUI as needed.
5. For Host Name, type a name. The name can be up to 15 characters in length.
6. For Workgroup, type a name. The name can be up to 15 characters in length. The workgroup name
can include alphanumeric characters and the following special characters: ! # $ @ & \ ( ) - . ^ _ { } ~
7. For Maximum Number of Sessions, verify the maximum number of connections.
8. To send the host name and workgroup name in unicode characters during SMB transmission, for
Unicode Support, select Enabled.
9. To manage device host names in a workgroup, for Auto Master Mode, select Enabled. When there is
no master browser in the workgroup, Auto Master Mode allows the printer to become the domain
master browser at startup.
10. To encrypt the password during SMB transmission, for Password Encryption, select Enabled.
11. For Print Timeout, type the amount of time allowed in seconds before print data times out.
12. For Non-print Timeout, type the amount of time in seconds before non-print data times out.
13. Click Save Changes.
Xerox
®
WorkCentre
®
3615 Black and White Multifunction Printer 47
System Administrator Guide

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux