Initial Setup
Setting the OffHook Wake Up
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
3. Touch System Settings, then touch General.
4. Touch OffHook Wake Up.
5. To have the printer leave Energy Saver mode when you pick up the handset of the external
telephone, touch On.
6. Touch OK.
Setting the Auto Log Print
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
3. Touch System Settings, then touch General.
4. To print a job history log after every 20 print jobs automatically, touch Auto Log Print.
5. Touch On.
6. Touch OK.
7. At the Restart System prompt, touch Close.
Configuring the Timers
Use the Timers menu to set the timeouts for the control panel touch screen, for faults, and for jobs being
sent to the printer.
To configure the timers:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
3. Touch System Settings > Timers.
4. To set the delay before the control panel times out, touch Control Panel, touch the delay that you
want, then touch OK.
5. To set how long the printer waits before canceling a print job that stops abnormally:
a. Touch Fault Timeout > On.
b. To enter a delay time, use the keypad. The range is 3–300 seconds.
c. Touch OK.
6. Touch the Back arrow to return to the previous menu, or press the Services Home button to return
to Service Home.
22 Xerox
®
WorkCentre
®
3615 Black and White Multifunction Printer
System Administrator Guide
To Next Page
Loading...
Need help?
General
