Xerox WorkCentre 3615 System Administrator Guide

Network Connectivity
Email Settings
Configure email settings to perform tasks such as sending alerts or faxes to an email address.
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
Note: If you do not know the IP address of your printer, see Finding the IP Address of Your Printer on
page 12.
2. Click Properties > Protocols > Email Settings.
3. For Enter the From: Email Address, type the email address that you want to use to send emails from
the printer.
Note: Before you click Auto Detect SMTP Server, to save your entries, click Save Changes.
4. For SMTP Server, enter the IP Address or DNS Name of the SMTP server. If you do not know the IP
Address or DNS Name of the SMTP server, click Auto Detect SMTP Server.
5. For SMTP Port, enter the port number for the SMTP server.
6. If the SMTP server requires authentication, select the Authentication Type, then enter the SMTP
Login Name and SMTP Password. If the login feature is not used, select No Authentication.
Note: When you select SMTP AUTH (Auto), the printer automatically supports
Plain/Login/CRAM-MD5. SMTP AUTH (Auto) works for most SMTP servers.
7. To verify the status of the SMTP Server Connection, click Refresh Status.
8. Click Save Changes.
Xerox
®
WorkCentre
®
3615 Black and White Multifunction Printer 57
System Administrator Guide

Xerox WorkCentre 3615 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax	Yes
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory (Standard)	256 MB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Print Speed	47 ppm
Scan Resolution	600 x 600 dpi
Automatic Document Feeder	50 sheets
Connectivity	Ethernet
First Page Out Time (Copy)	8.5 seconds
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux