Network Connectivity
Connecting to a Wireless Network
A wireless local area network (WLAN) provides the means to connect two or more devices in a LAN
without a physical connection. The printer can connect to a wireless LAN that includes a wireless router
or wireless access point. Before connecting the printer to a wireless network, the wireless router must be
configured with a service set identifier (SSID), a passphrase, and security protocols.
Notes:
• Wireless networking is available only on printers with the optional Wireless Network Adapter
installed.
• Some features are available only if you install the optional Data Memory Drive.
Resetting Wireless Settings
If the printer was previously installed in a wireless network environment, it could retain setup and
configuration information.
To prevent the printer from trying to connect to the previous network, perform the following steps:
1. At the printer control panel, press the Machine Status button.
2. Touch the Tools tab.
3. Touch Admin Setting > Network > Wi-Fi.
4. Touch the Down arrow to navigate to the next screen.
5. Touch Reset Wi-Fi > Reset > Yes, Reset.
Xerox
®
WorkCentre
®
3615 Black and White Multifunction Printer 35
System Administrator Guide
To Next Page
Loading...
