EasyManuals Logo

Xerox WorkCentre 6515 User Manual

Xerox WorkCentre 6515
326 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #195 background imageLoading...
Page #195 background image
Troubleshooting
Document Prints From Wrong Tray
Probable Causes Solutions
Application and print driver have conflicting
tray selections.
1. Check the tray selected in the print driver.
2. Go to the page setup or printer settings of the application from
which you are printing.
3. Set the paper source to match the tray selected in the print
driver or set the paper source to Automatically Select.
Note: To have the print driver select the tray, set the tray used as
the paper source to Auto Selection Enabled.
Automatic 2-Sided Printing Problems
Probable Causes Solutions
Unsupported or incorrect paper. Ensure that you are using a supported paper size and weight for
2-sided printing. Envelopes and labels cannot be used for 2-sided
printing. For details, refer to Supported Standard Types and
Weights for Automatic 2-Sided Printing on page 71.
Your printer model is not configured with
automatic 2-sided printing.
Ensure that your printer supports automatic 2-sided printing. For
details, refer to Printer Configurations and Options on page 298.
Incorrect setting. In the print driver Paper/Output tab, select Properties > 2-Sided
Print.
Printer is Making Unusual Noises
Probable Causes Solutions
There is an obstruction or debris inside the
printer.
Power off the printer and remove the obstruction or debris. If you
cannot remove it, contact your Xerox representative.
Paper Tray Will Not Close
Probable Causes Solutions
The paper tray does not fully close.
If the tray is extended for legal-size paper, the tray protrudes
when it is inserted into the printer. For details, refer to
Configuring Trays 1 or 2 for the Paper Length on page 75.
Some debris or an object is blocking the tray.
The tray is hanging up on the table or shelf on which it is
located.
If the paper lift at the back of the tray is not locked down,
replace the tray.
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer 195
User Guide

Table of Contents

Other manuals for Xerox WorkCentre 6515

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 6515 and is the answer not in the manual?

Xerox WorkCentre 6515 Specifications

General IconGeneral
Print TechnologyLaser
Print ResolutionUp to 1200 x 2400 dpi
Scan ResolutionUp to 600 x 600 dpi
Copy ResolutionUp to 600 x 600 dpi
Fax ResolutionUp to 400 x 400 dpi
Monthly Duty CycleUp to 50, 000 pages
Automatic DuplexingYes
FunctionsPrint, Copy, Scan, Fax
Memory2 GB
Fax Speed33.6 Kbps
Paper Output150 sheets
Fax Transmission Speed3 seconds per page
Standard Paper Capacity300 sheets
ConnectivityUSB, Ethernet
Mobile PrintingApple AirPrint, Google Cloud Print, Mopria, Xerox Print Service Plug-in for Android
Maximum Paper Size8.5 x 14 inches
Dimensions420 x 506 x 500 mm
Print SpeedUp to 30 ppm
Paper InputBypass Tray: 50 sheets; Tray 1: 250 sheets

Related product manuals