System Administrator Functions
Configuring the Network Authentication
Network Authentication is a security protocol that requires users to provide their login credentials before
they can access the printer. The printer compares the user credentials to the information stored on an
authentication server.
To prove their identity, users can type their user credentials at the control panel, in the Embedded Web
Server, or they can use a card reader.
To configure access rights using network authentication:
• Provide information about your authentication server and configure authentication server settings.
• Enable Panel Lock. For details, refer to Managing Panel Lock.
• Ensure that service locks are set. For details, refer to Setting Service Locks.
• Ensure that Network Authentication is enabled. For details, refer to Configuring Secure Settings on
page 267.
To access the authentication system:
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator on page 265.
3. Click Permissions.
4. Click Login/Logout Settings.
5. For Network, click Edit.
6. For Network Login, select Kerberos, SMB, or LDAP, then click Next.
7. Configure the LDAP server, authentication, and custom filter settings. For details, refer to the
configuration topic for your authentication system.
For reference:
Configuring an LDAP Authentication System on page 271
Configuring an SMB Authentication System on page 271
Configuring a Kerberos Authentication System on page 272
270 Xerox
®
WorkCentre
®
6515 Color Multifunction Printer
User Guide
To Next Page
Loading...
Need help?
General
