System Administrator Functions
Configuring Email Alerts
Note: Before configuring email alerts, configure the printer to communicate with your SMTP email
server. For details, refer to Configuring the SMTP Server Settings.
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator on page 265.
3. On the Home page, for Supplies, click Details.
4. For Options, click Email Alerts.
5. For Email Alerts, type the email address for the recipient.
Note: A check mark on the toggle button indicates that the setting is enabled.
6. To enable or disable an email alert, for the alert type, click the toggle button.
7. Click OK.
Configuring PDL Settings from the Embedded Web Server
You can configure settings for the following PDL protocols:
• PCL
®
6/5e
• PostScript
®
• PDF
• TIFF/JPEG
Note: PCL
®
6/5e is the default PDL protocol.
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer 243
User Guide
To Next Page
Loading...
