Xerox WorkCentre 6515 User Manual

System Administrator Functions
Cloning Printer Settings
You can use cloning to copy configuration settings from one printer to another printer on the same
network.
Notes:
• Before using the clone feature, ensure that the source printer clone file is compatible with the
destination printer.
• Before you copy the address book, verify that the address book of the target printer is empty.
To clone the printer settings:
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator on page 265.
3. At the bottom of the Home page, click Cloning.
4. To install a clone file:
a. For Install Clone File, click Select.
b. Locate, then select a clone file from the source printer, then click Open.
• To select a different clone file, click the change file icon.
• To remove the selected clone file, click the Trash icon.
Note: Removing the clone file does not delete it from the computer.
c. To install the selected clone file, click Install.
5. To create a clone file:
a. Select the parameters to clone from this printer.
• To select individual parameters to clone from this printer, select the desired parameter.
• To choose all settings, select Select/Clear All.
• To clear all settings, clear Select/Clear All.
b. Click Create.
c. If prompted, save the clone file to a location that you can remember easily when you need the
file for installation.
Note: If you are not prompted to save the file, look for it in the Downloads folder on your computer.
6. When you are finished creating or installing a clone file, click Close.
Resetting the Printer
Using Software Resets to restart the printer is faster and wastes fewer consumables than powering the
printer on and off. Restarting the printer can take several minutes, during which time the Embedded
Web Server is not available.
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
2. In the Embedded Web Server, click Home > Support > Restart Device.
3. At the prompt, click Restart.
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer 239
User Guide

Xerox WorkCentre 6515 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 2400 dpi
Scan Resolution	Up to 600 x 600 dpi
Copy Resolution	Up to 600 x 600 dpi
Fax Resolution	Up to 400 x 400 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Automatic Duplexing	Yes
Functions	Print, Copy, Scan, Fax
Memory	2 GB
Fax Speed	33.6 Kbps
Paper Output	150 sheets
Fax Transmission Speed	3 seconds per page
Standard Paper Capacity	300 sheets
Connectivity	USB, Ethernet
Mobile Printing	Apple AirPrint, Google Cloud Print, Mopria, Xerox Print Service Plug-in for Android
Maximum Paper Size	8.5 x 14 inches
Dimensions	420 x 506 x 500 mm
Print Speed	Up to 30 ppm
Paper Input	Bypass Tray: 50 sheets; Tray 1: 250 sheets