Xerox WorkCentre 6515

System Administrator Functions
Viewing Printer Information
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
The Embedded Web Server Home page appears.
2. In the printer status area, click Details.
The Device Details page opens, showing printer information, network connectivity details, and
system administrator information.
Configuring the Login Method From the Embedded Web Server
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator on page 265.
3. Click Permissions > Login/Logout Settings.
4. Select a login method:
− Simple: Passwords are not required.
− Local: Passwords are required.
− Network: A remote server handles login authentication. Device User Accounts are used only for
personalization and permissions.
− Convenience: Log in with a magnetic-strip card. Device User Accounts are used only for
personalization and permissions.
5. To select the Simple or Local authentication, for either option, click Select, select how users identify
themselves, then click OK.
6. To select network authentication, for Network, click Select. Choose an authentication protocol, click
Next, then configure the authentication settings. For assistance, contact your system administrator.
7. To select Convenience authentication, for Convenience, click Select, enter a server IP address, then
click Next.
234 Xerox
®
WorkCentre
®
6515 Color Multifunction Printer
User Guide