Features
Power Saver
You can set the time the printer spends idle in ready mode before the printer transitions to a lower
power level. For details, referto Configuring Power Saver Using the Embedded Web Server on page 235.
There are two levels of power-saver mode.
• Low Power Timeout: The printer shifts from Ready mode to Low Power mode to reduce standby
power consumption.
• Sleep Timeout: The printer shifts from Low Power mode to Sleep mode for a greater reduction in
power consumption.
Note: Increasing the default Power Saver activation times can result in an overall higher energy
consumption of the printer.
Exiting Sleep Mode
The printer exits Low Power mode or Sleep mode automatically when it receives data from a connected
device.
To exit Low Power mode or Sleep mode manually, at the control panel, press the Power/Wake button.
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer 31
User Guide
To Next Page
Loading...
