Xerox WorkCentre 6515 User Manual

Installation and Setup
Selecting a Location for the Printer
1. Select a dust-free area with temperatures from 5–32°C (41–90°F), and relative humidity 15–85%.
Note: Sudden temperature fluctuations can affect print quality. Rapid heating of a cold room can
cause condensation inside the printer, directly interfering with image transfer.
2. Place the printer on a level, solid, non-vibrating surface with adequate strength for the weight of the
printer. The printer must be horizontal with all four feet in solid contact with the surface. To find the
weight for your printer configuration, refer to Physical Specifications on page 300. Select a location
with adequate clearance to access supplies and to provide proper ventilation. To find the clearance
requirements for your printer, refer to Clearance Requirements on page 301.
3. After positioning the printer, you are ready to connect it to the power source and computer or
network.
Opening the Output Tray Extension
1. To provide better support for your prints, open the Output Tray Extension.
2. To print on longer paper, open the Output Tray Extension, then pull out the upper section until it
stops.
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer 39
User Guide

Xerox WorkCentre 6515 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 2400 dpi
Scan Resolution	Up to 600 x 600 dpi
Copy Resolution	Up to 600 x 600 dpi
Fax Resolution	Up to 400 x 400 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Automatic Duplexing	Yes
Functions	Print, Copy, Scan, Fax
Memory	2 GB
Fax Speed	33.6 Kbps
Paper Output	150 sheets
Fax Transmission Speed	3 seconds per page
Standard Paper Capacity	300 sheets
Connectivity	USB, Ethernet
Mobile Printing	Apple AirPrint, Google Cloud Print, Mopria, Xerox Print Service Plug-in for Android
Maximum Paper Size	8.5 x 14 inches
Dimensions	420 x 506 x 500 mm
Print Speed	Up to 30 ppm
Paper Input	Bypass Tray: 50 sheets; Tray 1: 250 sheets