Xerox WorkCentre 6515

Paper and Media
7. Push the tray in all the way.
Notes:
• If the tray does not go all the way in, ensure that the paper lift at the back of the tray is locked
down.
• To avoid paper jams, do not remove the paper cover while printing is in progress.
• If the tray is extended for legal size paper, the tray protrudes when it is inserted into the
printer.
8. If the control panel prompts you, verify the size and type on the screen. If you are not prompted,
change the paper settings.
a. At the printer control panel, press the Home button.
b. Touch Device > Paper Trays.
c. In the Paper Trays menu, touch the desired tray.
d. To configure the printer to prompt you to set the paper type and size when paper is loaded,
touch Tray Mode, then touch Fully Adjustable.
e. To dedicate the tray for a paper size, type, or color, touch Tray Mode, then touch Dedicated.
• To select a paper or envelope size, touch the current size setting, then from the list, select
the size.
• To select a paper type, touch the current paper type, then from the list, select the paper
type.
• To select a paper color, touch the current paper color, then from the list, select the paper
color.
f. To save the setting, touch OK.
9. To return to the Home screen, press the Home button.
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer 79
User Guide