December 2006
4-8
WorkCentre M20, 4118, FaxCentre 2218 Family
REP 1.5
Repairs and Adjustments
3. Remove the IPR - shield SMPS upper, Figure 1.
Figure 1 IPR - shield SMPS upper removal
4. Disconnect CON1, CON2 and CON3 from the SMPS.
5. Remove the SMPS, Figure 2.
Figure 2 SMPS removal
Replacement
Replacement is the reverse of the removal procedure.
Disconnect 2 ground
harnesses
2
Remove 1 screw, then the
IPR - shield SMPS upper.
1
Remove 4 screws, then
the SMPS
To Next Page
Loading...
