Xerox WorkCentre M20 - Page 196

December 2006
5-36
WorkCentre M20, 4118, FaxCentre 2218 Family
PL 10.10
Parts Lists
PL 10.10 Exit Assembly
Item Part Description
1 600N01736 MEC - Exit Assembly (M20F) (REP
10.2)
– 038N00498 MEC - Exit Assembly (4118, 2218)
(REP 10.2)
2 – PMO - Guide - Exit Upper (P/O PL
10.10 Item 1)
3 – PMO - Guide - Exit Lower (P/O PL
10.10 Item 1)
4 – PMO - Guide - Jam Remove (P/O
PL 10.10 Item 1)
5 007N01115 MEC - Roller Exit Drive
6 022N01474 PMO - Roller Decurl
7 020N00768 PMO - Pulley Duplex
8 023N01051 Belt - Timing Gear
9 007N01261 Gear - Duplex (M20F)
– 007N01542 Gear - Duplex (4118, 2218)
10 013N00514 Bearing
11 – IPR - Ground - Exit (P/O PL 10.10
Item 1)
12 – ICT - Shaft - Exit Lower ID (P/O PL
10.10 Item 1)
13 – PMO - Roller Exit (P/O PL 10.10
Item 1)
14 – Spring - Exit Roll FD (P/O PL 10.10
Item 1)
15 – PMO - Holder Exit Roll (P/O PL
10.10 Item 1)
16 – PMO - Roller FD F (P/O PL 10.10
Item 1)
17 – PMO - Roller FD R (P/O PL 10.10
Item 1)
18 – Spring - Exit Lower Idle (P/O PL
10.10 Item 1)
19 115N00354 MEC - Brush Antistatic
20 – PBA SUB - Bin Full Sensor (Not
Spared)
21 – Actuator SUB - Bin Full Sensor (P/
O PL 10.10 Item 1)
22 – E - Clip (P/O PL 10.10 Item 1)
23 – Bearing (P/O PL 10.10 Item 1)
24 – Bearing (P/O PL 10.10 Item 1)
NOTE: If necessary, refer to GP 20 for the acronym list and
cross reference lists of more commonly recognised part
names.