December 2006
6-21
WorkCentre M20, 4118, FaxCentre 2218 Family
GP 3
General Procedures and Information
WorkCentre 4118X
Refer to Figure 5 for the WorkCentre 4118X service mode flowchart. The flowchart only shows
the upper two levels of options that are available. Refer to Table 5 for the complete list of
options.
Table 4 4118P service mode settings
Function Item Option
Machine Setup Tray 1 Size Letter / A4 / Legal / Folio
Tray 2 Size Letter / A4 / Legal / Folio
Bypass Size Letter / A4 / Legal / Folio / A5/ Statement
Collated On / Off
Power Save On / Off On: 15 / 30 / 60 / 120
Machine Timeout 15 / 30 / 60 / 180 / Off
Stamp RX Name Off / On
Alarm Sound On / Off
Key Sound Off / On
Speaker Control Off / Low / Med / High
Language English / French / German / Italian / Spanish /
Portuguese / Dutch / Danish / Finnish / Nor-
wegian / Swedish / Russian
Localisation Inch / MM
USB Mode Fast / Slow
Machine ID Fax no:
Name:
Date & Time 00-00-0000 / 00:00 (AM)
Clock Mode 12/ 24 Hours
Toner Save Off / On
System Admin
Tools
Password protect Machine Setup Protect All /
Allow all /
Allow Tray Sizes
Fax Setup Protect All /
Allow All /
Allow Speed Dials
System Admin Tools Protect All / Allow All
Reports Protect All / Allow All
Auxiliary Access On / Off
Network Setup Reset NIC / Configure Network / Netware /
Use Factory Defaults
Change Passcode
Maintenance (GP
6)
Serial Number / Clean Drum / New Drum /
Billing Counters / Notify Toner Low/ Clear
Memory / Switch Test / Modem Test / DRAM
Test / ROM Test / Pattern Test / Shading Test
/ Engine Test / Silence Time / Flash Upgrade
/ Reset Passcode
Reports System Data / Billing/counters / Connect
Page / Print All Reports
Table 4 4118P service mode settings
Function Item Option
To Next Page
Loading...
