Xerox WorkCentre M20

To Next Page

To Previous Page

December 2006

2-15

WorkCentre M20, 4118, FaxCentre 2218 Family

9.1, 9.2

Status Indicator RAPs

9.1 Install Cartridge RAP

The toner cartridge is not installed or the CRUM in the toner cartridge is not in good contact

with the PBA SUB terminal.

Procedure

WARNING

Switch off the electricity to the machine. Disconnect the power cord from the customer

supply while performing tasks that do not need electricity. Electricity can cause death or

injury. Moving parts can cause injury.

NOTE: If necessary, refer to GP 20 for the acronym list and cross reference lists of more com-

monly recognised part names.

Refer to the following:

• (M20F) Wiring Diagram 4

• (4118) Wiring Diagram 10

• (2218) Wiring Diagram 15

Perform the following:

1. Install the ELA - toner unit set, PL 9.10 Item 2.

2. Go to GP 1. Perform the Toner State test.

3. If the test cannot be performed, check the CRUM contact within the holder terminal, PL

4.15 Item 7. Install new components as necessary, PL 4.15.

4. Install new components as necessary:

• ELA - toner unit set, PL 9.10 Item 2.

• PBA main (M20F), PL 1.10 Item 4.

• PBA main (4118), PL 1.15 Item 9.

• PBA main (2218), PL 1.20 Item 9.

9.2 Non-Xerox Toner Cartridge RAP

The machine detects an incompatible toner cartridge.