Yamaha XT250X - Page 248

SIGNALING SYSTEM
7-23
The neutral indicator light fails to come.
The speedometer fails to operate.
1. Check the neutral switch.
Refer to “CHECKING THE
SWITCHES” on page 7-33.
NG→ Replace the neutral switch.
OK↓
2. Check the entire signaling system’s
wiring.
Refer to
“CIRCUIT DIAGRAM” on page
7-19
.
NG→
Properly connect or repair the signaling
system’s wiring.
OK↓
This circuit is OK.
1. Check the speed sensor.
Refer to “CHECKING THE SPEED
SENSOR” on page 7-46.
NG→ Replace the speed sensor.
OK↓
2. Check the entire signaling system’s
wiring.
Refer to
“CIRCUIT DIAGRAM” on page
7-19.
NG→
Properly connect or repair the signaling
system’s wiring.
OK↓
Replace the meter assembly.