Yanmar B95W - Page 127

B95W
Maintenance
06_Wartung und Pflege_en.fm - V1.0 - 1.8.17
125 / 306
6
20
Work to be carried out by trained dealer service personnel:
Tab. 6-5 Initial Inspection
Pos. Inspection Page
1 Check machine for presence of machine-specific operating instructions --
2 Check engine oil level 134
3 Check the coolant level 137
4 Checking the hydraulic oil level 166
5 Check the fuel level 148
6 Check the oil level in the axles 175
7 Check pressure and condition of tires
Check the tightness of wheel nuts
182
8 Check the battery fluid level and charge condition
Check battery and cable connectors and fit if necessary
187
9 Top up windshield washer system 200
10
Check AdBlue
®
level
162
11 Check v-ribbed belt tension 159
12 Check all hose connectors and brackets for correct fit --
13 Check engine mounting --
14 Ensure that authorized personnel check the engine monitoring/warning system --
15 Remove any transport equipment from the vicinity --
16 Remove the engine’s corrosion protection --
17 Perform a test run
18 Lubricate the machine (all lubricating points) 122
19 Perform a test run, a functional test of the hydraulic system and a test job --
20 Visual inspection of all hoses, pipes, cylinders, etc. for leak tightness --
21 Check function of electrical indicating and warning elements, as well as the
lighting
--
22 Fill in the warranty/hand-over card correctly and send it back to Yanmar 115