B95W
Operation
216 / 306
7
07_Bedienung_en.fm - V1.0 - 1.8.17
26
In the event of a malfunction, the corresponding warning lamps on the control
panel will light up. See chapter 5.3 “Display and control elements in the
operator's compartment”.
The machine is equipped with a warning buzzer, which emits a warning signal,
should a fault occur.
The following faults are indicated by a warning signal:
Risk posed by unresolved faults
If the engine and the machine are put into operation without
prior remedy of the defect, severe damage to the engine
may result.
Z Pay attention to the indicators and resolve any faults
immediately.
Risk posed by lack of consumables
Operating the machine with insufficient or no working
consumables can result in serious machine damage!
Z Pay attention to the indicators.
Z Top up the consumables.
Low fuel level
Engine coolant overheated
To Next Page
Loading...
