6.3 Drive Alarms, Faults, and Errors
YASKAWA ELECTRIC
SIEP C710636 02B YASKAWA U1000 Technical Manual 353
■ Auto-Tuning Errors
Table 6.13 Auto-Tuning Error Displays
■ Errors and Displays When Using the Copy Function
Table 6.14 Copy Errors
Digital Operator Display
Name Page
Digital Operator Display
Name Page
LED Operator LCD Operator LED Operator LCD Operator
End1 Excessive V/f Setting 376 Er-10 Motor Direction Error 377
End2 Motor Iron-Core Saturation Coefficient 376 Er-11 Motor Speed Error 377
End3 Rated Current Setting Alarm 376 Er-12 Current Detection Error 378
End4 Adjusted Slip Calculation Error 376 Er-13 Leakage Inductance Error 378
End5 Resistance Tuning Error 376 Er-14 Motor Speed Error 2 378
End6 Leakage Inductance Alarm 376 Er-15 Torque Saturation Error 378
End7 No-Load Current Alarm 376 Er-16 Inertia ID Error 378
Er-01 Motor Data Error 376 Er-17 Reverse Prohibited Error 378
Er-02 Minor Fault 377 Er-18 Induction Voltage Error 378
Er-03 STOP Button Input 377 Er-19 PM Inductance Error 378
Er-04 Line-to-Line Resistance Error 377 Er-20 Stator Resistance Error 378
Er-05 No-Load Current Error 377 Er-21 Z Pulse Correction Error 378
Er-08 Rated Slip Error 377 Er-25
High Frequency Injection Parameter
Tuning Error
379
Er-09 Acceleration Error 377 –– – –
Digital Operator Display
Name Page
LED Operator LCD Operator
CoPy Writing Parameter Settings (flashing) 380
CPEr Control Mode Mismatch 380
CPyE Error Writing Data 380
CSEr Copy Unit Error 380
dFPS Drive Model Mismatch 380
End Task Complete 380
iFEr Communication Error 380
ndAT Model, Voltage Class, Capacity Mismatch 380
rdEr Error Reading Data 381
rEAd Reading Parameter Settings (flashing) 381
vAEr Voltage Class, Capacity Mismatch 381
vFyE Parameter settings in the drive and those saved to the copy function are not the same 381
vrFy Comparing Parameter Settings (flashing) 381
SIEP_C710636_02B_1_0.book 353 ページ ２０１５年１１月２５日 水曜日 午後４時５６分
To Next Page
Loading...
