YASKAWA U1000 Series - Page 604

D.3 UL Standards
604 YASKAWA ELECTRIC SIEP C710636 02B YASKAWA U1000 Technical Manual
Note: Use crimp insulated terminals or insulated shrink tubing for wiring connections. Wires should have a continuous maximum
allowable temperature of 75°C 600 Vac UL-approved vinyl-sheathed insulation.
Harmonic Filter Module
Table D.10 Harmonic Filter Module Closed-Loop Crimp Terminal Size
for CIMR-UA40720 to 40930, CIMR-UD40720 to 40930, and CIMR-UT40720 to 40930
Note: Use crimp insulated terminals or insulated shrink tubing for wiring connections. Wires should have a continuous maximum
allowable temperature of 75°C 600 Vac UL-approved vinyl-sheathed insulation.
40930
1/0 M12 R60-12
YF-1
YET-300-1
TD-321
TD-311
TP-060 100-066-160
2/0 M12 70-12
YF-1
YET-300-1
TD-322
TD-311
TP-080 100-054-036
4/0
<1> M12 R100-12
YF-1
YET-300-1
TD-324
TD-312
TP-100 100-051-270
250 M12 R150-12
YF-1
YET-300-1
TD-325
TD-313
TP-150 100-051-273
300 M12 R150-12
YF-1
YET-300-1
TD-325
TD-313
TP-150 100-051-273
<1> Recommended wire gauges.
<2> Codes refer to a set of three crimp terminals and three insulation caps. Prepare input and output wiring using two sets for each
connection.
Model
<1> Recommended wire gauges.
<2> Codes refer to a set of three crimp terminals and three insulation caps. Prepare input and output wiring using two sets for each
connection.
Wire Gauge (AWG,
kcmil)
Screw Size
Crimp Terminal
Model Number
Tool
Insulation Cap
Model No.
Code <2>
R/L1, S/L2, T/L3
X, Y, Z
Machine No. Die Jaw
Three-Phase 400 V Class Harmonic Filter Modules
EUJ71180.
1/0 M12 R60-12
YF-1
YET-300-1
TD-321
TD-311
TP-060 100-066-160
2/0 M12 70-12
YF-1
YET-300-1
TD-322
TD-311
TP-080 100-054-036
4/0 M12 R100-12
YF-1
YET-300-1
TD-324
TD-312
TP-100 100-051-270
250 M12 R150-12
YF-1
YET-300-1
TD-325
TD-313
TP-150 100-051-273
300
<1> M12 R150-12
YF-1
YET-300-1
TD-325
TD-313
TP-150 100-051-273
EUJ71181.
1/0 M12 R60-12
YF-1
YET-300-1
TD-321
TD-311
TP-060 100-066-160
2/0 M12 70-12
YF-1
YET-300-1
TD-322
TD-311
TP-080 100-054-036
3/0 M12 80-12
YF-1
YET-300-1
TD-323
TD-312
TP-080 100-051-268
4/0
<1> M12 R100-12
YF-1
YET-300-1
TD-324
TD-312
TP-100 100-051-270
250 M12 R150-12
YF-1
YET-300-1
TD-325
TD-313
TP-150 100-051-273
300 M12 R150-12
YF-1
YET-300-1
TD-325
TD-313
TP-150 100-051-273
EUJ71182.
1/0 M12 R60-12
YF-1
YET-300-1
TD-321
TD-311
TP-060 100-066-160
2/0 M12 70-12
YF-1
YET-300-1
TD-322
TD-311
TP-080 100-054-036
4/0 <1> M12 R100-12
YF-1
YET-300-1
TD-324
TD-312
TP-100 100-051-270
250 M12 R150-12
YF-1
YET-300-1
TD-325
TD-313
TP-150 100-051-273
300 M12 R150-12
YF-1
YET-300-1
TD-325
TD-313
TP-150 100-051-273
Drive Model
Wire Gauge
(AWG, kcmil)
Screw Size
Crimp Terminal
Model Number
Tool
Insulation Cap
Model No.
Code <2>
X, Y, Z
U/T1, V/T2, W/T3
Machine No. Die Jaw
SIEP_C710636_02B_1_0.book 604 ページ ２０１５年１１月２５日 水曜日 午後４時５６分