E.3 User Setting Table
YASKAWA ELECTRIC
SIEP C710636 02B YASKAWA U1000 Technical Manual 621
T1-02 Motor Rated Power
T1-03 Motor Rated Voltage
T1-04 Motor Rated Current
T1-05 Motor Base Frequency
T1-06 Number of Motor Poles
T1-07 Motor Base Speed
T1-08 PG Number of Pulses Per Revolution
T1-09 Motor No-Load Current (Stationary Auto-Tuning)
T1-10 Motor Rated Slip (Stationary Auto-Tuning)
T1-11 Motor Iron Loss
T2-01 PM Motor Auto-Tuning Mode Selection
T2-02 PM Motor Code Selection
T2-03 PM Motor Type
T2-04 PM Motor Rated Power
T2-05 PM Motor Rated Voltage
T2-06 PM Motor Rated Current
T2-07 PM Motor Base Frequency
T2-08 Number of PM Motor Poles
T2-09 PM Motor Base Speed
T2-10 PM Motor Stator Resistance
T2-11 PM Motor d-Axis Inductance
T2-12 PM Motor q-Axis Inductance
T2-13 Induced Voltage Constant Unit Selection
T2-14 PM Motor Induced Voltage Constant (Ke)
T2-15 Pull-In Current Level for PM Motor Tuning
T2-16
PG Number of Pulses Per Revolution for PM Motor
Tuning
T2-17 Encoder Z-Pulse Offset
T3-01 Inertia Tuning Frequency Reference
T3-02 Inertia Tuning Reference Amplitude
T3-03 Motor Inertia
T3-04 ASR Response Frequency
No. Name
User
Setting
SIEP_C710636_02B_1_0.book 621 ページ ２０１５年１１月２５日 水曜日 午後４時５６分
To Next Page
Loading...
