YASKAWA U1000 Series - Page 92

3.8 Main Circuit Wiring
92 YASKAWA ELECTRIC SIEP C710636 02B YASKAWA U1000 Technical Manual
■ Three-Phase 200 V Class
Table 3.5 Wire Gauge and Torque Specifications (Three-Phase 200 V Class)
Model
CIMR-U
<1> Gauges listed here are for use in Japan.
<2> Gauges listed here are for use in the United States.
<3> Gauges listed here are for use in Europe and China.
Terminal
For Asia <1> For U.S.A. <2> For Europe and China <3>
Screw
Size
Tightening
Torque
Nm (lb.in.)
Recomm.
Gauge
mm
2
Applicable
Gauge
mm
2
Recomm.
Gauge
AWG, kcmil
Applicable
Gauge
AWG, kcmil
Recomm.
Gauge
mm
2
Applicable
Gauge
mm
2
20028
R/L1, S/L2, T/L3 5.5 3.5 to 8 8 10 to 8 4 2.5 to 10 M5
2.3 to 2.7
(20.4 to 23.9)
U/T1, V/T2, W/T3 5.5 3.5 to 8 8 10 to 8 4 2.5 to 10 M5
5.5 5.5 to 14 8 10 to 6 6 6 to 16 M6
3.9 to 4.9
(34.7 to 43.4)
p1, n1 2 2 to 3.5 14 14 to 12 2.5 2.5 to 4 M4
1 to 1.4
(8.9 to 12.4)
20042
R/L1, S/L2, T/L3 14 5.5 to 22 6 8 to 3 10 5.5 to 25 M6
4 to 6
(35.4 to 53.1)
U/T1, V/T2, W/T3 14 5.5 to 22 6 8 to 3 10 5.5 to 25 M6
5.5 5.5 to 22 8 10 to 3 10 6 to 25 M8
8.8 to 10.8
(78.1 to 95.5)
p1, n1 2 2 to 3.5 14 14 to 12 2.5 2.5 to 4 M4
1 to 1.4
(8.9 to 12.4)
20054
R/L1, S/L2, T/L3 14 14 to 22 4 6 to 3 16 10 to 25 M6
4 to 6
(35.4 to 53.1)
U/T1, V/T2, W/T3 14 14 to 22 4 6 to 3 16 10 to 25 M6
8 8 to 22 6 8 to 3 10 10 to 25 M8
8.8 to 10.8
(78.1 to 95.5)
p1, n1 2 2 to 3.5 14 14 to 12 2.5 2.5 to 4 M4
1 to 1.4
(8.9 to 12.4)
20068
R/L1, S/L2, T/L3 22 14 to 22 4 4 to 3 16 16 to 25 M6
4 to 6
(35.4 to 53.1)
U/T1, V/T2, W/T3 22 14 to 22 4 4 to 3 16 16 to 25 M6
14 14 to 22 6 6 to 3 16 16 to 25 M8
8.8 to 10.8
(78.1 to 95.5)
p1, n1 2 2 to 3.5 14 14 to 12 2.5 2.5 to 4 M4
1 to 1.4
(8.9 to 12.4)
20081
R/L1, S/L2, T/L3 8 × 2P 8 to 22 × 2P 6 × 2P 6 to 3 × 2P 25 16 to 25 M6
4 to 6
(35.4 to 53.1)
U/T1, V/T2, W/T3 8 × 2P 8 to 22 × 2P 6 × 2P 6 to 3 × 2P 25 16 to 25 M6
14 14 to 22 6 6 to 3 16 16 to 25 M8
8.8 to 10.8
(78.1 to 95.5)
p1, n1 2 2 to 3.5 14 14 to 12 2.5 2.5 to 4 M4
1 to 1.4
(8.9 to 12.4)
20104
R/L1, S/L2, T/L3 38 8 to 60 × 2P 1 6 to 1/0 × 2P 35 10 to 50 × 2P M8
8 to 10
(70.8 to 88.5)
U/T1, V/T2, W/T3 38 8 to 60 × 2P 1 6 to 1/0 × 2P 35 10 to 50 × 2P M8
22 22 to 38 4 4 to 1 25 10 to 35 M8
8.8 to 10.8
(78.1 to 95.5)
p1, n1 2 2 to 3.5 14 14 to 12 2.5 2.5 to 4 M4
1.2 to 2.0
(10.4 to 17.4)
20130
R/L1, S/L2, T/L3 22 × 2P 14 to 60 × 2P 4 × 2P 6 to 1/0 × 2P 16 × 2P 10 to 50 × 2P M8
8 to 10
(70.8 to 88.5)
U/T1, V/T2, W/T3 22 × 2P 14 to 60 × 2P 4 × 2P 6 to 1/0 × 2P 16 × 2P 10 to 50 × 2P M8
22 22 to 38 4 4 to 1 16 16 to 35 M8
8.8 to 10.8
(78.1 to 95.5)
p1, n1 2 2 to 3.5 14 14 to 12 2.5 2.5 to 4 M4
1.2 to 2.0
(10.4 to 17.4)
20154
R/L1, S/L2, T/L3 22 × 2P 22 to 100 × 2P 3 × 2P 4 to 4/0 × 2P 25 × 2P 16 to 95 × 2P M10
15 to 20
(130 to 173)
U/T1, V/T2, W/T3 22 × 2P 22 to 100 × 2P 3 × 2P 4 to 4/0 × 2P 25 × 2P 16 to 95 × 2P M10
22 22 to 60 4 4 to 2/0 25 25 to 70 M10
17.7 to 22.6
(156 to 200)
p1, n1 2 2 to 3.5 14 14 to 12 2.5 2.5 to 4 M4
1.2 to 2.0
(10.4 to 17.4)
20192
R/L1, S/L2, T/L3 38 × 2P 22 to 100 × 2P 1 × 2P 3 to 4/0 × 2P 35 × 2P 25 to 95 × 2P M10
15 to 20
(130 to 173)
U/T1, V/T2, W/T3 38 × 2P 22 to 100 × 2P 1 × 2P 3 to 4/0 × 2P 35 × 2P 25 to 95 × 2P M10
22 22 to 60 3 4 to 2/0 25 25 to 70 M10
17.7 to 22.6
(156 to 200)
p1, n1 2 2 to 3.5 14 14 to 12 2.5 2.5 to 4 M4
1.2 to 2.0
(10.4 to 17.4)
20248
R/L1, S/L2, T/L3 50 × 2P 38 to 100 × 2P 2/0 × 2P 1 to 4/0 × 2P 50 × 2P 35 to 95 × 2P M10
15 to 20
(130 to 173)
U/T1, V/T2, W/T3 50 × 2P 38 to 100 × 2P 2/0 × 2P 1 to 4/0 × 2P 50 × 2P 35 to 95 × 2P M10
22 22 to 100 3 4 to 4/0 35 25 to 95 M12
31.4 to 39.2
(278 to 347)
p1, n1 2 2 to 3.5 14 14 to 12 2.5 2.5 to 4 M4
1.2 to 2.0
(10.4 to 17.4)
SIEP_C710636_02B_1_0.book 92 ページ ２０１５年１１月２５日 水曜日 午後４時５６分