YASKAWA YRC1000 Operator's Manual

MANUAL NO. RE-CSO-A054
YRC1000
OPERATOR’S MANUAL
FOR SPOT WELDING USING MOTOR GUN
Upon receipt of the product and prior to initial operation, read these instructions below
thoroughly, and retain for future reference.
MOTOMAN INSTRUCTIONS
MOTOMAN- INSTRUCTIONS
YRC1000 INSTRUCTIONS
YRC1000 OPERATOR’S MANUAL (GENERAL) (SUBJECT SPECIFIC)
YRC1000 MAINTENANCE MANUAL
YRC1000 ALARM CODES (MAJOR ALARMS) (MINOR ALARMS)
The YRC1000 operator’s manual above corresponds to specific usage. Be sure to use the appropriate manual.
The YRC1000 operator’s manual above consists of “GENERAL” and “SUBJECT SPECIFIC”.
The YRC1000 alarm codes above consists of “MAJOR ALARMS” and “MINOR ALARMS”.
182903-1CD
0
1 of 198

YASKAWA YRC1000 Specifications

General

Model	YRC1000
Category	Controller
Cooling System	Forced air cooling
Ambient Temperature	0 to 45°C
Protection Class	IP20
Number of Controlled Axes	Up to 8 axes
Programming Language	Inform III
Operating System	Proprietary Yaskawa OS
Storage Temperature	-10 to 60°C
Interface	Ethernet, USB
Safety Standards	ISO 10218-1, ISO 13849-1
Mounting	Floor or wall
Communication Interfaces	Ethernet, RS-232
Power Supply	3-phase AC 200V to 230V
Humidity	20% to 85% (non-condensing)