1 Spot Welding Application Using a Motor Gun
1.13 Other Functions Using a Motor Gun
1-137
1.13 Other Functions Using a Motor Gun
1.13.1 Motor Gun Stroke
The motor gun stroke is classified into two; full open and short open.
1.13.1.1 Registering the Full-open/Short-open Position
Eight stroke positions can be registered for full open and short open
respectively.
Full Open Position Setting
1. GUN NO.
Shows the gun for position setting.
Select a gun No. by pressing [PAGE].
2. SEL
The mark “” is displayed at the currently selected position.
3. POSITION
Shows the gun stroke.
To Next Page
Loading...
