YASKAWA YRC1000 - Wear Detection with Tip Dressing Instruction

1 Spot Welding Application Using a Motor Gun
1.11 Tip Dressing Instruction (SVDRESMOV Instruction)
1-105
1.11.5.4 Wear Detection with Tip Dressing Instruction
By adding tags for wear detection (TWC-A, TWC-C) to Tip Dressing
Instruction (SVDRESMOV Instruction), amount of wear is detected.
<Example>
SVDRESMOV GUN#(1) DRS#(1) TWC-A
SVDRESMOV GUN#(1) DRS#(1) TWC-C
For the details of TWC-A, TWC-C and wear detecting operation, refer to
chapter 1.12 Tip Wear Detection and Wear Compensation (Motor Gun).
When detecting wears with Tip Dressing Instruction (SVDRESMOV
Instruction), set a value to {DRESSER THICKNESS} on SPOT
SUPERVISION window.
Please note that this instruction is not available for registering the base
position for wear detection.
115 of 198