YASKAWA YRC1000 - User Coordinate Number Setting

1 Spot Welding Application Using a Motor Gun
1.12 Tip Wear Detection and Wear Compensation (Motor Gun)
1-123
1.12.5.2 User Coordinate Number Setting
1. Select {SPOT WELDING} on the {Main Menu}.
2. Select {GUN CONDITION}.
3. Move the cursor to {GUN INSTALLATION STATUS} and press
[SELECT].
– Select “FIXED”.
– {USER COORDINATE NO.} is indiated.
4. To {USER COORDINATE NO.}, specify a user coordinate No.
specified to the gun.
133 of 198