YASKAWA YRC1000 - Signal Dry Spot; Setting an Input Signal Number

1 Spot Welding Application Using a Motor Gun
1.13 Other Functions Using a Motor Gun
1-149
1.13.4 Signal Dry Spot
Gun-pressure can be applied by inputting an external signal.
1.13.4.1 Setting an Input Signal Number
1. Select {SPOT WELDING} on the {Main Menu}.
2. Select {GUN DETAIL SETTING}.
– GUN DETAIL SETTING window appears.
3. Select a signal number to be set.
NOTE
Gun-pressure can be applied by an external signal for dry
spot only.
Welding cannot be carried out by an external signal.
159 of 198