YASKAWA YRC1000 - Confirmation of Motor Gun Auto Tuning Operation Status

1 Spot Welding Application Using a Motor Gun
1.3 Setting of Motor Gun
1-18
1.3.7 Confirmation of Motor Gun Auto Tuning Operation Status
1. Select {SPOT WELDING} under the {Main Menu}.
2. Select {MOTOR GUN AUTO TUNING}.
– The MOTOR GUN AUTO TUNING window appears.
3. Select the gun number using [PAGE]
or {PAGE}.
– The operation is completed if {COMPLETE} is indicated at
{STATUS}.
– The operation is not completed if {INCOMPLETE} is indicated at
{STATUS}.
NOTE
The result of the MOTOR GUN AUTO TUNING operation is
stored in the MOTOR GUN AUTO TUNING file.
And the MOTOR GUN AUTO TUNING file is stored in FILE/
GENERAL DATA.
Please do not load MOTOR GUN AUTO TUNING file to
other controllers.
28 of 198