YASKAWA YRC1000 - Clearance of MOTOR GUN AUTO TUNING Setting

1 Spot Welding Application Using a Motor Gun
1.3 Setting of Motor Gun
1-19
1.3.8 Clearance of MOTOR GUN AUTO TUNING Setting
When re-setting the gun condition file due to the change of the gun, etc,
clear the Motor Gun Auto Tuning setting by following the procedures
below.
1. Select {SPOT WELDING} under the {Main Menu}.
2. Select {MOTOR GUN AUTO TUNING}.
– The MOTOR GUN AUTO TUNING window appears.
3. Select the gun number using [PAGE]
or {PAGE}.
4. Select {DATA} - {CLEAR DATA].
– A confirmation dialog box appears.
29 of 198