YASKAWA YRC1000 - Setting the Pressure Compensation Value

1 Spot Welding Application Using a Motor Gun
1.13 Other Functions Using a Motor Gun
1-155
1.13.5.3 Setting the Pressure Compensation Value
The following describes settings for pressure compensation value of
pattern 2.
For details on the data registration of pattern 1; applying pressure
downwards (settings for pressure-to-torque conversion value), refer to
chapter 1.3.9 "Setting of Torque to Pressure Conversion Data".
1. Select {SPOT WELDING} on the {Main Menu}.
2. Select {GUN CONDITION}.
– GUN CONDITION window appears.
165 of 198