YASKAWA YRC1000 - Application Condition Setting

1 Spot Welding Application Using a Motor Gun
1.4 System Setting (Motor Gun)
1-49
1.4.7 Application Condition Setting
Regarding the miscellaneous items for the spot (motor gun) application,
set them in the APPLICATION CONDITION SETTING window.
 Application Condition Setting
1. CLEARANCE TEACHING METHOD
Set the teaching method of the clearance teaching function.
Select from the three teaching methods below.
UPPER TIP : Teaching with the upper tip contacting the workpiece.
LOWER TIP: Teaching with the lower tip contacting the workpiece.
GUN CLOSE: Teaching with both tips contacting the workpiece.
Refer to chapter 1.10.2 "Setting the Teaching Type" for more details.
2. MAX NUMBER OF WELDER CONNECT
Set the number of the welders.
1
2
3
4
5
6
7
9
10
11
8
12
13
14
15
16
17
18
20
21
19
22
23
24
25
26
27
28
30
31
29
59 of 198