YASKAWA YRC1000 - Loading the DX100 Motor Gun Condition File

1 Spot Welding Application Using a Motor Gun
1.14 Loading the DX100 Motor Gun Condition File
1-180
1.14 Loading the DX100 Motor Gun Condition File
Some files in the DX100 motor gun condition files cannot be loaded to the
YRC1000 due to different formats. Thus, load the DX100 condition files in
the table below to the YRC1000 by using the {LOAD DX100 SPOT FILES}
in the sub-menu of the {EX. MEMORY} in the main menu.
 Operation
1. Select {LOAD DX100 SPOT FILES} in the {EX.MEMORY}.
The DX100 condition file
to be loaded
The YRC1000 condition file to which
the setting in the loaded files are
reflected
Motor Gun Pressure Data
SPRESS.CND
Motor Gun Pressure Data
SGPRS.CND
Pressure Data
SPRESSCL.CND
Pressure Data
SGPRSCL.CND
Spot Gun Cond Data
SGSPEC.DAT
Spot Gun Cond Data
SGUN.DAT
Gun Detail Setting
SGDTL.DAT
Spot Management Data
SGSPTMNG.DAT
Spot I/O Allocation data
SPOTIO.DAT
Spot I/O Allocation Data
SGIO.DAT
Spot Welder Cond Data
SWELDER.DAT
Spot Welder IF Data
SGWELDIF.DAT
Clearance Setting
CLEARNCE.DAT
Clearance Setting
SGCLARNC.DAT
190 of 198