1 Spot Welding Application Using a Motor Gun
1.11 Tip Dressing Instruction (SVDRESMOV Instruction)
1-110
4.DRESSING TORQUE(CURRENT, TOLERANCE, SETTING
(OUT#))
Servo dresser average torque absolute data measured between the
pressure reach time and pressure complete time is indicated.
Tolerance range for this operation: 0 to 300%
– Condition to ON the signal
Current value < Tolerance range (minimum value) or Current value>
Tolerance range (maximum value)
– Condition to OFF the signal
Tolerance range (minimum value)
=< Current value =< Tolerance
range (maximum value)
5. CLEAR TORALENCE OUTPUT
OFF all the universal output signals designated to DRESS LENGTH,
DRESS TIME, STARTING TORQUE and DRESSING TORQUE when a
specified CLEAR TORALENCE OUTPUT is changed from OFF to ON.
To Next Page
Loading...
