YASKAWA YRC1000 - Page 180

1 Spot Welding Application Using a Motor Gun
1.13 Other Functions Using a Motor Gun
1-170
 Setting of Workpiece Thickness Measurement
1. Set the mode switch of programming pendant to the Play mode.
2. Select {JOB}, then {JOB} on the {Main Menu}.
– JOB CONTENT window appears.
SUPPLE-
MENT
• Set the mode switch of programming pendant to the Play
mode.
• When it is in the thickness measure mode, whether the
detected thickness is within the allowable range or not is
not monitored.
180 of 198