1 Spot Welding Application Using a Motor Gun
1.7 Welding Instruction (SVSPOT Instruction)
1-64
3. Select a file number by pressing [PAGE].
4. Select an item to be specified.
5. Input a numeric value and press [ENTER].
– For {END CONDITION}, “PRESS TIME” and “END WAIT” alternate
each time [SELECT] is pressed.
6. Move the cursor to {SETTING} and press [SELECT].
– “DONE” appears to this item.
Table 1-3: <Example>
PRESS (N) END CONDITION
1ST PRESS 2000 PRESS TIME 0.20 sec
2ND PRESS 1500 PRESS TIME 0.10 sec
3RD PRESS 2200 PRESS TIME 0.20 sec
4TH PRESS 1800 END WAIT -
Pressure
Weld Complete
0.2 0.2
1000
2000
1500
2200
1800
t
t
0.1
Gun pressure can be edited during the playback operation.
The edited content is reflected after the gun pressure set-
ting is done.
To Next Page
Loading...
