YASKAWA Z1000 CIMR-ZU*A Series

Point
Numb
er
Point
Type
Point Name
Factory
Default
(SI
Units)
Eng. Units
(SI Units)
Slope
(SI
Units)
Intercept
(SI Units)
On Text Off Text Parameter
78 LDI MF IN 4 MON OFF – 1 0 ON OFF U1-10 (Bit 5)
79 LAI PID DEVIATE 0 % 0.01 0 – – U5-02
80 LAO PID I LIMIT 100 % 0.1 0 – – b5-04
81 LAO PID UP LIMIT 100 % 0.1 0 – – b5-06
82 LAO PID OFFS ADJ 100 % 0.1 -100 – – b5-07
83 LAO PID PRI DYTM 0 s 0.1 0 – – b5-08
84 LAO PID FB RMDS 0 – 1 0 – – b5-12
85 LAO PID FB RMDL 0 % 1 0 – – b5-13
86 LAO PID FB RMDT 1 s 0.1 0 – – b5-14
87 LAI PID OUT CAP 0 % 0.01 0 – – U5-14
88 LAI PID REF 0 % 0.01 0 – – U5-04
89 LAI COMM ERR CD 0 – 1 0 – – U1-19
90 LDO
COMM FLT
ENA
ENABLE – 1 0
ENABL
E
DISABLE H5-05
91 LAO CBL LOSS FRQ 0 Hz 0.01 0 – – d1-04
92 LAO CBL LOSS TMR 2 s 0.1 0 – – H5-09
93 LDI OK.FAULT OK – 1 0 FAULT OK U1-12 (Bit 7)
94 LDO RESET FAULT NO – 1 0 RESET NO –
95 LDI
DRV COMM
ERR
NO FLT – 1 0 FAULT NO FLT –
96 LDO EXTERNAL FLT OK – 1 0 FAULT OK –
97 LDI MF IN 5 MON OFF – 1 0 ON OFF U1-10 (Bit 6)
99 LAI
ERROR
STATUS
0 – 1 0 – – U1-19
<1> Set H1-03 to 70 , Drive Enable2, for pt 35 to work properly.
C.5 APOGEE FLN Point Database
YASKAWA SIEP YAIZ1U 03B YASKAWA AC Drive – Z1000 Programming Manual
277
C
APOGEE FLN (P1) Communications