8-8 IM 765501-01E
8. If you use the numeric keys, press a soft key corresponding to the desired unit
or the Enter soft key to confirm the setting.
Explanation
Comparison Operation
Determines the magnitude relation between the displayed value and the reference
values (upper and lower) and displays the result. You can combine the two reference
values to determine the upper > displayed value > lower relationship.
The results of the comparison are displayed as follows:
Displayed Value Display of the Comparison Determination of the
Result in the Status External Input/Output
Display Area Section
+ oL High HI
Displayed value > Upper High HI
Upper ≥ Displayed value ≥ Lower In IN
Lower > Displayed value Low LO
- oL Low LO
Setting the Reference Value
Set the reference values so that Upper is greater than Lower.
<<Corresponding Command Mnemonic>>
:CALCulate:LIMit[:STATe]
:CALCulate:LIMit:UPPer
:CALCulate:LIMit:LOWer
8.4 Comparison Operation
To Next Page
Loading...
